annealing carbon
英 [əˈniːlɪŋ ˈkɑːbən]
美 [əˈniːlɪŋ ˈkɑːrbən]
网络 退火碳
双语例句
- Research on the Development of Electropulsing Annealing Device and Its Treatment Process to the Hard-drawn Carbon Steel Wire
冷拔钢丝电脉冲退火装置的研制及其工艺研究 - Influence of vacuum annealing treatment on mechanical and tribological property of chromium-doped graphite-like carbon coatings
真空退火处理对掺Cr类石墨碳膜力学和摩擦学性能的影响 - Effects of Annealing Processes on Mechanical Properties for Ultra-low Carbon Cold Rolled Sheets
退火工艺对超低碳钢冷轧薄板力学性能的影响 - Annealing texture of CSP low carbon steel sheet under different cold rolling reduction ratio
CSP工艺不同冷轧压下率低碳钢板退火织构的演变 - The Process of the Electric Pulse Annealing Treatment to Soften the Hard-drawn Carbon Steel Wire
冷拔碳钢钢丝电脉冲退火软化处理工艺 - Continuous annealing of Ti and Ti+ Nb bearing ultra-low carbon bake hardening steels
Ti和Ti+Nb处理的超低碳烘烤硬化钢连续退火研究 - Influence of Thermal Sintering and Annealing Technics on Field Emission of Screen-printed Carbon Nanotube Films on Glass Substrate
热烧结及其退火工艺对玻璃衬底印刷碳纳米管薄膜场发射的影响 - Effect of continuous annealing process on mechanical properties of low carbon Al-killed steel sheet
连续退火工艺对低碳铝镇静钢性能的影响 - Laying Down the Technology of Annealing Low Carbon Steel Wire with Coal powder Burning Furnace
燃煤粉炉低碳钢丝退火工艺的制定 - Kinetics of austenitization during intercritical annealing of low carbon low alloy steels
低碳低合金钢临界区奥氏体化动力学的研究 - Morphology and forming mechanism of annealing twin in medium carbon steels have been studied with optical microscope.
利用光学显微镜对中碳钢退火孪晶的形态及形成机制进行了研究。 - Annealing Furnace for Low Carbon Steel Wire Heated with Coal Powder
煤粉加热低碳钢丝退火炉 - The Morphology and Forming Mechanism of Annealing Twin in Medium Carbon Steels
中碳钢退火孪晶的形态及形成机制 - The intermedium pickling and oxidation annealing can greatly reduce the carbon content in the oxide film.
中间酸洗和氧化退火能较大幅度地降低氧化膜中碳的含量。 - A New Spheroidal Annealing Technology for a Cold-Forging Steel of Low Carbon
一种新的低碳冷镦钢的球化工艺 - And it has also shown that CW-CO2 laser annealing in air would decrease the carbon contamination on the Si surface, but produce oxygen contamination.
实验还证明：空气中的CWCO2激光退火可以减少样品表面的碳沾污，但产生氧沾污。 - The technical differences of heating before rolling, hot rolling, cooling after rolling and annealing after cold rolling between low carbon structural micro-alloyed steels containing V and Ti were compared.
比较了含Ti和含V的低碳结构用微合金钢在轧前加热、热轧过程、轧后冷却及冷轧退火方面工艺特点的差别。 - To meet uninterruptedly increasing in the demand for the cold rolled steel sheets and to meet the technological demand of continuous annealing, the production of ultra-low carbon steel is increasing.
为了满足市场对冷轧薄板钢需求量的不断增加和连续退火工艺要求，超低碳钢生产也在不断增加。 - Investigation on Rapid Spheroidization Annealing of Medium Carbon Steel
中碳钢快速球化退火工艺的研究 - Using pit-etching method to determine the annealing texture of cold rolling low carbon deep drawing steel sheet
冷轧低碳深冲钢板退火织构的蚀坑法测定 - Annealing of the powder in N_2 at 1873K for 1h results in the transformation of the amorphous SiC to β-SiC and α-SiC, During the annealing, parts of oxygen, free carbon or organic impurities escaped from the powder.
非晶SiC粉末在1873K，氮气中退火1h后转变为β－SiC及α－SiC，同时，粉末中部分氧杂质及自由碳脱出粉末。 - Annealing Furnace of Galvanized Low Carbon Steel Wire
电镀锌低碳钢丝的退火设备 - Using spectroscopic ellipsometry, the influence of thermal annealing on optical properties of the plasma-deposited hydrogenated amorphous carbon films is investigated.
用椭圆偏振光谱法研究了热处理对射频辉光放电淀积的氢化非晶碳膜光学性质的影响。 - Phosphorus segregation and annealing texture in a low carbon steel sheets
低碳钢中磷的偏聚与再结晶织构 - The optimal middle annealing temperature increases with the increase of the carbon content.
合金的最佳中间退火温度随碳含量的增加而升高。 - Influence of Annealing on Field Emission Characteristics of Single-walled Carbon Nanotubes Assembled on Tungsten Tip
热处理对单壁碳纳米管场发射的影响 - The effect of annealing temperature and loading of activated carbon on phase structure and electrochemical properties of RuO2/ AC composite electrode is revealed.
揭示了RuO2/AC复合材料热处理温度及活性碳含量对其物相结构及电化学性能的影响规律。 - Tool& mould steel should be carried spheroidizing annealing after forging or rolling, due to high carbon and high alloy content, in order to homogeneous microstructure, decrease hardness and convenience to machining.
工模具钢由于合金元素和含碳量都较高，在锻轧后都要进行球化退火处理，以均匀组织和降低硬度，方便模具的机械加工。